iDryer x2 Filament Dryer

Features

• Spool capacity: 2
• Drying temperature: up to 100°C
• Heater temperature control: yes
• Air temperature monitoring in chamber: yes
• Drying time: unlimited
• Forced ventilation: yes
• Filament weighing: yes
• Presets: yes
• Supported filament types: PLA, ABS, HIPS, PETG, SBS, Flex, PA6, PA12, PC, ABS, ASA, PP, POM, and others

Full enclosure model

PIR Enclosure x2.stp

Recommended material for printed parts - ABS or ABS CF

Cutting Plan

cut_x2.pdf

Important

All internal parts of the enclosure must be printed from materials that can withstand 100°C or higher.

The air duct in the lower compartment must be insulated. The insulation solution used in the x4 project is provided for reference and can be reused as-is or replaced with any thermal insulation material. If not insulated, warm-up time will increase significantly and power consumption will rise.

iDryer x3 Filament Dryer

Features

• Spool capacity: 3
• Drying temperature: up to 100°C
• Heater temperature control: yes
• Air temperature monitoring in chamber: yes
• Drying time: unlimited
• Forced ventilation: yes
• Filament weighing: yes
• Presets: yes
• Supported filament types: PLA, ABS, HIPS, PETG, SBS, Flex, PA6, PA12, PC, ABS, ASA, PP, POM, and others

Full enclosure model

PIR Enclosure x3.stp

Recommended material for printed parts - ABS or ABS CF

Cutting Plan

cut_x3.pdf

Important

All internal parts of the enclosure must be printed from materials that can withstand 100°C or higher.

The air duct in the lower compartment must be insulated. The insulation solution used in the x3 project is provided for reference and can be reused as-is or replaced with any thermal insulation material. If not insulated, warm-up time will increase significantly and power consumption will rise.