Models for Printing

iDryer v4 stliDryer v4 stepiDryer DuoiDryer v3

Part	Description
	archive - parts bundle
	Light diffuser
	Light separator
	Base MCU - lower housing (plain)
	Base MCU - lower housing
	UTP cable duct
	Cable duct
	MCU electronics bay back cover
	Display enclosure
	Knob
	Display panel
	Base EXT - lower housing (plain)
	Base EXT - lower housing
	EXT electronics bay back cover
	Top cover
	Top cover (plain)
	Heater spacer (left)
	Heater spacer (right)
	Electronics bay side cover (left)
	Electronics bay side cover (right)
	Internal floor
	Floor clip for flat temp/humidity sensor cable
	Air damper blade for 3.7g servo
	Damper housing half 1 (3.7g servo)
	Damper housing half 2 (3.7g servo)
	Air damper blade for 9g servo
	Damper housing half 1 (9g servo)
	Damper housing half 2 (9g servo)
	Printed roller 11×84 for 693 bearings
	Printed roller 11×84 for 693 bearings
	Printed roller 11×84 for 693 bearings
	Latch handle
	Latch
	Logo plate
	Filament outlet (plastic fitting)
	Nameplate
	Filament outlet plug
	Foot

Part	Description
	assembly
	archive - parts bundle
	Light diffuser
	Light separator
	Base - lower housing (plain)
	Base - lower housing
	UTP cable duct
	Cable duct
	MCU electronics bay back cover
	Display enclosure
	Knob
	Display panel
	Base - lower housing (plain)
	Base - lower housing
	EXT electronics bay back cover
	Top cover
	Top cover (plain)
	Heater spacer (left)
	Heater spacer (right)
	Electronics bay side cover (left)
	Electronics bay side cover (right)
	Internal floor
	Floor clip for flat temp/humidity sensor cable
	Air damper blade for 3.7g servo
	Damper housing half 1 (3.7g servo)
	Damper housing half 2 (3.7g servo)
	Air damper blade for 9g servo
	Damper housing half 1 (9g servo)
	Damper housing half 2 (9g servo)
	Printed roller 11×84 for 693 bearings
	Printed roller 11×84 for 693 bearings
	Printed roller 11×84 for 693 bearings
	Latch handle
	Latch
	Logo plate
	Filament outlet (plastic fitting)
	Nameplate
	Filament outlet plug
	Foot

Duo MCU Compartment Back Cover

Duo MCU Base

Duo Silica Tray

Duo Top Cover

MCU Base

EXT Base

Top Cover

EXT Electronics Compartment Back Cover

MCU Electronics Compartment Back Cover

Left Electronics Compartment Cover

Right Electronics Compartment Cover

Latch Handle

Latch

Filament Outlet

Floor

Sensor Retainer

MCU Light Diffuser

MCU Light Separator 1

MCU Light Separator 2

MCU Light Separator 3

MCU Light Separator 4

Damper

Damper Lower Housing

Damper Upper Housing

Servo damper 3.7г

Servo damper 3.7г gap 0.25

Servo damper 3.7г gap 0.5

Logo Plate

Name Plate 1

Name Plate 2

Name Plate 3

Name Plate 4

Foot

Plug 1

Plug 2

Enclosure Printing Parameters:

• Material: ABS, ABS-CF, ABS-GF, PP
• Line width: 0.6 - 0.8 mm (ensure proper chamber formation during printing)
• Perimeters: 1
• Infill: 10-15%
• Infill pattern: linear
• Gap closing radius: 0.02

Orientation of parts